EngiMaster Fixed Wing - Vertical

EngiMaster is available for:

• Engines with carburetor.
• Engines with injection.

ENGINE FUNCTIONS:

• Engine rpm
• Rotor revolutions
• MAP with integrated sensor
• Oil pressure
• Oil temperature
• 6 CHT inputs
• 6 EGT inputs
• Fuel pressure
• OAT (outside air temperature)
• CAT (Carburettor/AirBox air temperature)
• Voltmeter
• Ammeter
• Hour counter, also divided into green, yellow and red zones for the time
• Engine peak RPM memories (last flight peak RPM and RPM highest ever)
• Rotor peak RPM memories (last flight peak RPM and RPM maximum ever)
• Flight chronometer
• Local time-UTC time (GPS connection required)
• 3 Composite video input
• 2 inputs for contactors

     FUEL MANAGEMENT FUNCTIONS:

Fuel computer (fuel flow, range, fuel remaining, fuel burned, range and reserve at destination). AND' can activate 3 alarms for remaining fuel, time emptying and balancing the tanks.
When a measurement falls below its setpoint the alarm occurs activated on both the display and/or the audio output tone or warning vocal.
Fuel Computer functions will require the Fuel Activation Key Optional computer code 661000.
3 fuel level sensor inputs with calibration for transmitters capacitive and resistive.

    OTHER FUNCTIONS:

200 hour data logger with integrated graphic data viewer and possibility to export data
Software upgradeable via USB pen drive
20 Hz data sampling
  
     ALARMS:

Engine alarms are activated when the relevant measurement is out of range, can be displayed either on the audio output tone or on the voice alert message.

Technical specifications:

• Dimensions: 125 x 83.7 x 18 mm (Display unit); 135 x 79 x 20mm (remote module)
• Weight: 185 g + 180 g
• Operating temperature range: -20~+70°C
• Power supply voltage: 12~30 Vdc
• Supply current: 260 mA
• 4.3 inch TFT color LCD screen.
• Display brightness: 1000 nits, adjustable.
• LineOut audio for intercom
• 2 CAN Bus communication interfaces
• GPS input: RS-232 standard, data format: NMEA-0183, sentences requests: $GPRMC and $GPRMB
• 1 USB port
• Internal memory for 200 hours of data logger

The following wiring and probes are available

• Code. 601008 EGT probe with 2.5 m cable + solder fitting
• Code. 601013 Pre-wired cable for EGT probes
• Code. 601020 OAT probe (Outdoor air temperature) with 2.5 m cable
• Code. 601030 CAT probe (Rotax airbox air temperature), thread 10x1 and 2.5 m cable
• Code. 503030 RedCube fuel flow transducer
• Code. 661055 Computer page software activation key EngiMaster Fuel
• Code. 601041 Fuel pressure transducer with 2.0 m + cable connection
• Code. 601060 Amperometric probe +/- 50 A
• Code. 601061 Amperometric probe +/- 100 A
• Code. 602000 Oil pressure probe, Rotax 4-20mA compatible, with 1/8" NPT male thread
• Code. 601070 Color camera
• Code. 603000 Professional crimping pliers
• Code. 601090 GPS receiver