Lambert Aerodevices T2 WINGS Arrow-Shaped Position Flashing Lights for Wings

A set of green and red strobe/position lights that act as a collision avoidance system. Designed for ultralight wings.
The set includes:

T2 R Flash Beacon - left red
T2 G Flash Beacon - right green

If any of the lights in the set are damaged, a new one can be purchased separately. A keel beacon can also be purchased in addition to the set.

Basic Specifications Technical Parameters

Supply voltage: 9 ÷ 18 VDC
The beacon is protected against reverse polarity of the supply voltage.
Current consumption (parking light): 0.35 A at 12 VDC
Current consumption (headlight): 2.5 A at 12 VDC, pulsed when flashing
Power consumption (parking light): 4 W at 12 VDC
Power consumption (headlight): 30 W at 12 VDC, pulsed when flashing
Flash repetition: 1.2 s
Dimensions: 112 × 33 × 26 mm
Weight: 59 g
Wire Length: 280mm 20 AWG

Wire Marking
GND Ground
POS. Positive for Position/Navigation
STR. Positive for Strobe
SYNC Synchronization (Optional)

Installation

Mount the green beacon on the right wing of the UL aircraft. Mount the red beacon on the left wing of the UL aircraft. Mount the keel beacon on the top of the rudder of the UL aircraft. Connect the positive power wire to the POS and STROBE wires (we can connect and activate them separately or together). Also, connect the negative power wire to GND, and the SYNC signal can be connected to other beacons. If the SYNC signal is not connected, the headlight flashes will not be synchronized.

More Information

This product is not approved for installation on certified aircraft. This is not a TSO-certified light.